|
If your
phone has a "JOGDIAL" (for example SonyEricsson K700i), then you must press the
"down arrow" instead of the "left arrow" for step 3 & 5. By "Down Arrow" I
mean directing the Jogdial down!
How
to Enter Unlock Codes on Sony Ericsson Cell Phones (Most models):
1)
For the unlocking of a locked Sony Ericsson no sim card is required.
2) Turn
on the handset. Display will indicate 'Insert SIM.'
3) Press the left Arrow
(<) button.
4) Press the star (*) button twice.
5) Press the left Arrow
(<) button again.
6) You will briefly see one of the following messages
listed on devices display: 'Personalized with MNC2' or 'Personalized with
MNC3'.
7) Wait approximately three seconds.
8) The display will indicate
'Network' and a picture of a closed lock.
9) Press Select.
10) The display
will indicate 'Unlock (Net) 5' and 'NCK:'
11) Enter the 16 digit NLCK4U code
(unlock code we provided you) and press okay.
12) The handset will display
'Network unlocked' and the display 'Insert SIM' appears.
13) The handset is
successfully unlocked.
NOTE:
1)
When doing the first 5 Steps, you need to do it fast.
2) If you get NCK: (0),
this means the phone is hard locked. The phone cannot be unlocked since there
have been more than 5 wrong attempts.
3) If you have tried a few times and
are getting 'Not Allowed', your phone cannot unlock due to too many wrong
attempts made on the phone. Phone has been hardlocked.
How
to Enter Unlock Codes on TM506:
1)
Insert a T-Mobile SIM into the device.
2) From the main screen, press the
Navigation key left.
3) Press the Star * key.
4) Press the Star * key
again.
5) Press the Navigation key left.
6) The handset displays Network
Locked.
7) Select OK.
8) Enter the 16 digit SIM subsidy unlock code.
9)
Select OK.
|
Cell Phone Parts
Iphone Parts
